上課筆記
  • 20190227
  • 20190227
  • 20190306
  • 20190306
  • 20190313
  • 20190320
  • 20190327
  • 20190327
  • 20190327
  • 20190417
  • 20190424
  • 20190501
  • 20190508
  • 20190515
  • 20190529
  • 20190605
  • 20190917
  • 20190917
  • 20190924
  • 20191001
  • 20191001
  • 20191008
  • 20191008
  • 20191015
  • 20191015
  • 20191022
  • 20191022
  • 20191029
  • 20191029
  • 20191105
  • 20191105
  • 20191119
  • 20191119
  • 20191203
  • 20191203
  • 20191210
  • 20191217
  • 20191217
  • 20191224
  • 20191224
Powered by GitBook
On this page

Was this helpful?

20190924

eve ng

Previous20190917Next20191001

Last updated 5 years ago

Was this helpful?

讓兩台tinycore的linux能夠互ping
ip addr add 192.168.1.1/24 brd + dev eth0
L1:192.168.1.1
L2:192.168.1.2
以下是互ping結果。
建立一個linux(tinycore)+NAT環境
請依照https://iotbytes.wordpress.com/configure-ssh-server-on-microcore-tiny-linux/
tce-load -wi openssh
sudo /usr/local/etc/init.d/openssh start
sudo adduser user
netstat -tunlp | grep 22
sudo user@127.0.0.1
準備一台netem跟兩台tinycore環境

分別在兩台tinycore設定ip然後互ping
netem設定loss為50、delay為50 or 100
分別觀察有沒有遺失封包。

Configure SSH Server on Tiny Core Linux using openSSHIoT Bytes
環境在右下方
Logo